Proximity Sensors with in-Cable Amplifiers
Features
- Shielded Sensor Heads from 3-mm diameters that can be embedded in metal.
- Robotics cables provided as a standard feature
- Indicator provided in Amplif of operation.
- Power supply range of 5 to 24 VDC for DC 3-Wire Models.
Output Circuits
Parameters
- EA6-03BR5NA
- Sensing distance: 0.5mm ± 15%
- Sensing distance: 0-0.3mm
- Standard sensing object: lron, 5x5x1mm
- Sensing object: Magnetic metal
- Voltage: 5-24V pulse(P-P)10% max.
- Leakage current: 10mA max.
- Operation mode: N.O.
- Control output: NPN open-collector output
Differential travel | 10% max. of sensing distance | |
Response speed | 1kHz | |
Protection circuits | Surge suppressor.Output load short-circuit protection | |
lndicator | Operation indicator(red LED) | |
Ambient temperature | perating: -25~+70℃, Storage: -40~+85℃ (with no icing) | |
Ambient humidity | Operating/Storage:35~95%RH | |
Residual voltage | 1V max.(Load current:100m, Cable length:2m) | |
Insulation resistance | 50MΩ max.(DC500V) between current -carrying parts and case | |
Dielectric strength | AC500V 50/60Hz 1min between current -carrying parts and case | |
Vibration resistance | 10~55Hz 1.5mm double amplitude for 2 hours each in X,Y and Z directions | |
Shock resistance | 1000m/s2 10 times each X,Y and Zdirections | |
Degree of protection | IEC-IP64 | |
Material | Case | Brass-nickel plated |
ensing surface | ABS | |
Weight | Approx.45g | |
Accessories | Plastic stent |